These pre cast concrete feed troughs are designed for feeding either from one or both sides as required. They are available either as a trough on it’s own or complete with a galvanised steel adjustable barrier rail as shown.
Each unit is cast with lifting sockets set in along the top edge of the trough for easy lifting and fitting for which lifting loops can be provided. These lifting sockets are then used to bolt the barrier rail clamp to if they are required. The barrier rail itself is designed so that the ‘T’ section which supports the rail is central to the channel unit, therefore is does not interfere with the distribution of feed products in to the trough when using a spout from the back of the feed wagon. 
Units are available in widths of either 3’ (.915M) or 4’(1.22M), they are a standard depth of 2’(.61M). Units that are 3’(.915M) wide are cast in 12’(3.66M) lengths and units that are 4’ (4.22M) wide are cast in lengths of 8’(2.44M).
