|
|
|
 |
|
|
||||||||
|
||||||||
|
|
|
|
|
||||
|
|||
|
|
|
|
|
|
|
|
||||||||
|
||||||||
|
|
|
|
|
||||
|
|||
|
|
Our yankee strut wall panels are an extremely strong and economically priced walling system. They were initially designed as a silage wall system as the sloping wall design helps consolidation and facilitates rolling of grass, but they can be used for any type of storage such as grain, root crops and waste materials.
The yankee strut walls are available in two versions depending on individual requirements, they can either be manufactured with cast in starter bars which can then be tied in to the floor before concreting to form a complete rigid structure or the wall panels can also be manufactured to be bolted down to an existing concrete pad or strip foundation so they may be moved if necessary.
The wall panels are available in heights of 8’ and 10’ and are a standard width of 4’.
The weight of each 8’ high x 4’ section is 1.15T and the weight of each 10’ x 4’ section is 1.3T.
Each concrete section has lifting sockets along the top edge for which lifting loops are supplied for ease of lifting and fitting with suitable farm machinery.
|
||||||||||||||||||||||||
 |
||||||||||||||||||||||||
